Now , the Template Supporting Structure used for concrete at construction site has adopted the template brackets ,and it is commonly made up of steel or wooden beams .The followings is its disadvantage: labor-waste , material-waste, ugly and hard to adjust .In a word， it is of “low efficiency and bad quality”.
    In order to overcome the disadvantage, we finally invented the new-style kind of Digital Architecture Template Combination Structure (DSATSCS)after years of pain-taking efforts，the invention of DSATSCS has supplied a technical gap .and has won four pieces of national patent . DSATSCS is easy to operate and convenient to Install and dismantle .so it is widely-used, time-saving and material-saving .The fee of per m2 built with DSATSCS is 2 yuan RMB while the traditional Supporting Structure 15 yuan RMB. What’s more ,DSATSCS Can save a great deal of wood ,iron wire,nail and ect.
    DSATSCS is made of high pure cold steel. Its thickness is 2 to 2.5 millimeter. Its advantage is corruption-endurable, elastic, firm and not easy to be deformed.
    Its supporting pole can support 3-4 ton, the zone between two main beams can bear 2-2.5ton,each sub-beam can bear 1 ton. Now the general thickness of the concrete paddled currently on construction site is 10-15 cetimeter,the weight in the same zone is 100-150kg at most, So the supporting strength is enough for all buildings .The main beam can adjust its length within the scope of from 1.12 meter to 4.39 meter at will, the short beam is used in balcony, toilet and so on. The sub-beams has the specification of 1.15, 0.40and 0.80 meter, and its supporting beam is 2 meter long. The sub-beam can regulate in the scope of from 2.0 meter to 4.8meter at will . the link-pole can be adjusted at will when great halls are built .the base can be adjusted by 0.5meter，the nut has the effect of securing the supporting pole ， the hawk mouth like clip is used to connect the pole and strain. So that it can make DSATSCS firmer.
     The adjustive base can be adjusted higher by 1 to 45 centimeter ,the specifications of the short adjustive pole is 0.5 meter and 1 meter. And the short adjustive pole can be connected high limitlessly and isn’t negative to firmness .The ladder brace is easier to fix and useful to enhance the security of the structure .The main pole and sub-pole are connectecd with a half –revolying lock so it is not easy to break off. So is the case of the connection between base and supporting pole. we invented also this kind of special clip based on the traditional steel structure . in all, DSATSCS is effective .For example , it takes only 3-5minutes to finish 30 square meter construction site.